Change a Propane Tank
Forklifts fueled by propane are common inside warehouse environments. These forklifts have a propane mount situated behind the driver. These tanks have to be replaced periodically as they have limited lifespans. Operators of forklifts must utilize caution when handling propane tanks. Compressed gases are hazardous, particularly because the gas is flammable. Utilize care when replacing and removing propane tank to avoid being injured.
1 To change a propane tank, first stop the lift truck and leave the engine running, and turn off the valve on the tank. Let the forklift run until the engine dies. This procedure burns the gas off inside the transfer hose which connects the engine and the tank. Prior to taking the second steps, wear the proper safety equipment, such as insulated gloves made of either leather or neoprene. It is really vital for you to protect your skin from contact with the compressed gas, that is extremely cold.
2 The tank hose needs to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, reattach the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 Leaks can be inspected simply by applying soapy water to the valve and slightly opening it. If there is a leak, it will cause bubbles to froth from around the valve. If this occurs, check the connection hose at the nut and the valve area. The connecting nut must be re-tightened if you detect any leaks in the area of the valve, and then perform the leak checking procedure all over again. Persistent leaks mean that the nut and connecting hose should be replaced. Nonetheless, if replacing the nut and hose still does not stop the leak, the tank must be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. After that you could start the lift truck and resume operating.