The Proper and Safe Way to Use a Forklift
Essential equipment used to transport and lift different kinds of supplies and bulky loads are forklifts. This material handling machine is used daily in our society. Forklifts are found anywhere from a building supply company, in warehouses, at airports and in department stores and storage units. When utilizing a forklift, it is very essential to be completely aware of your surroundings in order to be safe.
The first step is to start the forklift by turning the key. Become familiar with the levers located at the right of the steering wheel. These levers are what you would be utilizing to move a thing from one place to another and also to maneuver the item to where it has to be positioned.
The second step is to utilize the first lever to move the forks up and down. Pull the lever towards you to move the fork up. In order to move the fork down, push the lever away from you. Unless you are unloading or loading an item, the forks should ideally be kept close to the ground.
Next, practice utilizing the other two levers before picking up a load. The second lever is used for tilting the forks backwards and forwards. In order to tilt the forks forwards, push the lever away from you. In order to tilt the forks back, pull the levers towards your body. These forks are capable of tilting between 15 and 30 degrees.
The next thing to get used of is utilizing the 3rd lever to control the movement of the forks from the left to right. From side to side, they could move between 6 and 12 inches. The levers move towards where you want the forks placed.
Once you are familiar, slowly approach the load you wish to pick up. To be able to lower the forks, push the first lever away from you. Drive forward carefully until the forks slide beneath the load. Carefully lift the load by pulling the lever towards you. If the load feels top heavy, be sure to slowly tilt the forks backwards.
You must go slow when you drive around corners. Make sure that you honk the horn located on the steering wheel in order to alert other individuals of the approaching machinery. Carefully approach the area where you will be unloading. Use the levers to maneuver the load to your final destination.
When you know how to stop a car then you know how to stop a forklift. Slowly step on the brake. It is situated on the left of the accelerator.