In nearly all cases, most people spend quite a lot of money purchasing their lift truck. Hence, it is really essential to take good care of it in order to protect your investment well into the long run. It is really a great idea to know the procedures that are carried out in the care and maintenance of this piece of equipment.
By starting up the forklift and listening carefully how it works is amongst the best ways to tell how good the engine is running. For example, if there are any misses or knocks, the equipment is defective and this must raise several issues. Furthermore listen carefully for any squealing sounds which come from the belts because these sounds will provide you with a lot of information.
Several of the main parts needing attention during maintenance comprise the safety warning devices, gauges, horn, the lights and the overhead guard. Any burnt out light bulbs or faulty parts need to be replaced as soon as they are noticed. It is also essential to inspect the wiring.
When the above parts have been inspected carefully, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each cell of the battery should be inspected so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and after that change the filters. The fuel filters, hydraulic filter and the transmission filter must be regularly replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make certain to apply some grease. Check the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Then, check each and every other component of the equipment including the wheels. If any type of problem or fault is detected, be certain to address it immediately so as to make sure the machinery is working at its safest and optimum levels.